FALLS Products Available From J-CRAFT

Falls TDL Series Truck Mount Direct Hydraulic Snow Wings Feature: • 10 Gauge A607-50 Steel, 30" High Moldboard • 9, 10, and 11 foot cutting edge lengths • Custom moldboard length available • 3.5" diameter double-acting hydraulic cylinders • 1-3/4" wing hinge bolt • Flotation front saddle with DirectLink™ Slide • AASHO & Carbide punch • Two cylinder control for precise positioning • Heavy-duty construction throughout • Hydraulic power front sideshift available • Trip edge available • Trip moldboard available (see below) • NitroCush™ buffer brace extension available (shown)

With a Falls W Series Truck Mount Cable Benching Snow Wing, You can convert any truck (2-1/2-ton and up) into an efficient snow fighter that clears up to 20' in one pass. Provides widening, benching or shelving operations to maximize your machine and man-power. Works in combination with one-way plows, reversible plows and V-plows. Rear mounted configuration available.

Falls Power Reversible Plows include both rigid and trip blade units for use at all operating speeds. These plows are built rugged to handle the diverse and demanding conditions involved when plowing airports, highways, city streets and rural roads. Features Include: • 5 rolled heavy channel iron ribs deliver maximum moldboard rigidity. Horizontal channel braces reinforce transverse stability • Moldboard tilt feature provides the flexibility to tilt the moldboard forward or back depending on snow and road conditions • Precise moldboard curvature provides proper lift, roll and throw of snow for fast, efficient, easier plowing • Standard built-in deflector shield minimizes overspray • Bottom support stucture is built with 4" x 4" x 3/4" A-36 MOD angle reinforced between the bolt holes for maximum strength •Spring trip assemblies. Available with optional slotted trip • Standard screw-adjustable mushroom shoes • 2 double acting reversing cylinders deliver positive control and feature hydraulic cushion valves for circuit protection • Oscillating A-frame features double tubular construction and 2" pivot bolt for rugged flexibilty.

TER Series-Trip Edge Power Reversible Snow Plow.

Double overlapping formed box sections, provide full length support of the moldboard face. 3 individual sectional trip edge units for use at slow to moderate operating speeds. Recommended for airports, highways, and city streets. Mounts on trucks and wheel loaders.

Falls Standard 20 & 40 Series Plow Hitches.

Designed for heavy duty use in all truck classes. Plowing forces are distributed to the chassis frame through 3/4" x 4" reinforced push arms. The lower hitch portion is equipped with push bar receptors and is heavily fortified to withstand forces of snowplowing. Push bar is manually pinned into receptors. The low profile vertical risers are designed to permit a wide range of hood openings without clumsy or costly tilting mechanisms. 20 Series Plow Hitch is for non front wing applications, and provides mounting from bumper to frame. 40 Series Plow Hitch incorporates mounting provision for front wing post, and includes side cheek plates for added stability to the truck frame. The 40 series hitch can be used with or without a wing.

Falls #X1 Modified Husting Quick Coupler (HH)

The Falls X1 Modified Husting Quick Coupler is a modified version of the 29" Husting Hitch. We've modified this hitch to fit Falls' standards so now it's stronger, more flexible and reliable. We also added a chain lift to the truck-mounted portion. This delivers a smooth, "no pry" lifting action. The plow-mount is made of rugged 8" x 4" x 1/2" angle iron with the entire length of the sliding pin slot reinforced with 1" square and 5" x 3" x 5/16" angle iron. It also has a center pivot pin which allows oscillation for closer manufacturing tolerances between truck and plow portions. Available as a model 21 (bumper to frame) or model 41 (w/wing post mounting provision). Options: 34" width, roller kit.

Falls #X4 Pin & Loop Quick Coupler

The Falls X4 Pin & Loop coupler features a plow-mounted loop and truck hitch-mounted coupler that delivers coupling that's fast and reliable. The truck hitch coupler is a positive drop-in, lever actuated pin. This hitch system is interchangeable with other similar loop couplers. Available as model 24 (bumper to frame) or model 44 (w/wing post mounting provision).

Falls X8 Jaw Quick Coupler (JCQ)

The Falls X8 Jaw Quick Coupler is a two-point latch system which keeps the moveable components attached to the snow plow. The solid components are a part of the truck-mounted assembly. This hitch system is interchangeable with other similar jaw couplers. Available as model 28 (bumper to frame) or model 48 (w/wing post mounting provision).

When winter shoves . . . Get Pushy! Push it back with heavy-duty Falls V-Plows for Trucks, Motor Graders, and Wheel Loaders.

The lift and roll of the moldboard discharges snow with ease and in one fluid motion. 90° included blade angle provides the easiest pushing V-Plow in the industry. Shoe adjustment (including nose shoe) is made easy without the use of tools. These plows easily adapt to major quick hitches and conventional hitches.

Available in two different sizes for truck applications: 9'8" Cutting Width w/6' discharge height, and 9'8" Cutting Width w/7' discharge height.

Discover the plow that was responsible for the beginning of the Falls Brand!

Fixed Angle Underchassis snow and ice scaper for trucks. Compact design for easy install and better blade contact angle. Recommended for airports, highways and city streets. Patented hydraulic accumulator system for consistent pressure. May be installed in combination with plow and wing. Available in 10 and 11 foot models. These fixed angle scrapers, come with single cylinder actuation standard -or- optional dual cylinder actuation, and 3/4" thick moldboard standard.

Features Include:
• AASHO and carbide punch
• 1-1/2" cold rolled steel hinge shaft
• High-visibility end markings
• 3" diameter cushioned hydraulic cylinder
• 500 psi. pressure reducing valve included
• Compact design for easy installs and better blade contact

When it comes to versatility, value and dependability, you won't find better spreader on the road. Falls Tailgate Spreaders are built tougher than they have to be and give you standard features that aren't even options on competitive equipment. Our line of spreaders is another reason Falls snow handling equipment is rated the best you can buy.

Exclusive Features Include:
• Berm Chute • 3/8" Thick Auger, 9" Diameter • Self-Leveling Spinner with Six (6) Flights • Right or Left Hand Discharge • Direct Hydraulic Shaft and Spinner Drive • End Plates Constructed of 1/4" Stainless Steel • Auger Shaft Tapped To Accept Speed Sensor •Oversized Hopper Opening To Reduce "Bridging" • Parker Torqlink TBO & Roller Stator Hyd. Motors • Hopper Constructed of 7 Gauge Stainless Steel • Full Length Hinged Bottom Cover with Easy Latch System • Full Length Hinged Top Cover for Dumping Operations with Two (2) Position Gate Opening.