|
Trailers by
J-CRAFT
Take
your 'pick of the litter' from J-CRAFT's
fine breed of PUP TRAILERS.
Whatever
the application (aggregates, asphalt, dirt, cement block,
sheetrock, lumber, etc.) we have you covered. We can
custom build to suit your needs. Whether it be a
closed or spread axle tandem, tri-axle, hinged tongue, solid
tongue, or steerable type, we have the expertise to help you
out.
Our
trailers are constructed with only the highest quality
components,
and comply to all current D.O.T.
regulations. Specifications
Back to previous page
|
General
Specifications
Back
|
|
| Frame: |
8"
X 4" X 3/8" wall rectangular tubing main rails &
crossmembers. Front drop assembly installed for attachment
of hinged or solid 'fixed' tongue.
|
| Solid
Tongue: |
7"
X 7" X 1/2" wall square tubing, integrated into frame
via 3/4" plates at front of frame, and in front of first
axle. Tongue pole is wish-bone braced to frame with
6" X 3" rectangular tubings, and fitted with a Premier
lunette eye. Nominal hitch height = 24" ground to
eye.
|
| Hinged
Tongue: |
4"
X 2" wall rectangular tubing main
rails, X-Braced by 3/8" X 4" flatbars. Attached
to trailer frame by Premier #430 hinges, fitted with DB1249-49
lunette eye, top-wind flip-up jack, and air-ride tongue
system. Nominal hitch height = 24" ground to eye.
|
| Suspension: |
Hutchens
Mfg. model H-7700 or H-9700 spring type suspension, with 3 leaf
Hi-Arch springs. Optional: Air-ride suspension.
|
| Axles: |
Rockwell,
Dexter, or Dana 5" round air axles, 20,000 lb or 25,000 lb
capacity, with spring parking brakes, anti-lock systems, quick
change brakes, long cams, and wet lube bearings. Equipped
with cast spoke or 10 stud hubs.
|
| Air
System: |
Premium
quality tandem or triaxle air systems, complete with anti-lock,
relays, storage tanks, lines and glad hands.
|
| Lighting: |
Standard
7 conductor cord/plug routed from tongue to junction box at rear
of frame. Brake-Tail-Turn lights installed at rear of
chassis.
|
| Rear
End Crash Protection: |
D.O.T.
certified 'energy absorbing' rear bumper system, provided and
installed where applicable.
|
| Prep/Paint: |
Exterior
surfaces of frame are grit blasted, epoxy primed, and
coated with 2K urethane 'GLOSS-BLACK' paint. Axles and
interior components coated with flat black.
|
Body:
|
Choose
from: Steel DSH gravel, Steel ELLIPTICAL gravel, Aluminum
gravel, Aluminum ELLIPTICAL gravel, FLATBED, or custom
application.
|
|
For
complete specifications, CLICK HERE to contact our Commercial Sales Representatives
|
